Review

NCASE M2 Build with RTX 5070 Ti and Ryzen 7

  • Updated December 22, 2025
  • Lydia Cole
  • 21 comments

After extensive planning and meticulous cable routing, my NCASE M2 “Level 9” build is now complete, featuring a custom modification to the GPU standoff for a secure and level installation. The system is built around high-performance components, including an AMD Ryzen 7 7800X3D CPU cooled by a Corsair iCUE Link H100i RGB, paired with an Asus ROG Strix B850-I Gaming WiFi motherboard and 64GB of Corsair Vengeance DDR5 memory. Storage consists of a 1TB Samsung 990 EVO Plus and a 2TB Samsung 9100 PRO, while the Gigabyte AERO OC GeForce RTX 5070 Ti 16GB delivers impressive graphics power, all powered by a Corsair SF850 850W Platinum PSU.

Thermal performance has been outstanding for such a compact build. During a 30-minute session of Cyberpunk 2077 on high settings, the CPU maintained a steady 62°C and the GPU stayed at 57°C. The iCUE Link ecosystem greatly simplified cable management, and despite the dense layout, airflow remains effective. This build not only meets but exceeds expectations in both performance and aesthetics, making it a proud addition to the SFFPC community.

Choose a language:

21 Comments

  1. Those temps in Cyberpunk are seriously impressive for such a compact build—my own SFF rig runs about 10°C warmer under similar load, so your cable management with the iCUE Link system clearly paid off. It makes me want to revisit the routing in my own case to see if I can squeeze out a bit more thermal headroom. What was the trickiest part of modifying the GPU standoff for that level fit?

    1. Thanks for the kind words—it’s great to hear from another SFF enthusiast who appreciates the thermal payoff from careful cable work. The trickiest part of the GPU standoff mod was actually measuring and filing the replacement standoff to the exact height needed without compromising its structural integrity; a digital caliper and a bit of patience were essential. If you’re considering a similar tweak, I’d recommend checking out the SFF Network forums for some great guides on GPU mounting solutions. I’d love to hear how your own cable management revisit goes, so feel free to share an update!

  2. Those CPU and GPU temps in Cyberpunk are seriously impressive for such a compact case—my own SFF build runs about 10°C warmer under similar load. Your point about the iCUE Link system simplifying cable management really resonates, as that’s the biggest headache in my NR200. What was the trickiest part of modifying the GPU standoff for that clean install?

    1. Thanks for the kind words—managing cables in an NR200 is definitely a familiar challenge! The trickiest part of the GPU standoff mod was actually measuring and drilling the new mounting holes precisely to avoid any flex, which I did by using the original standoff as a template. If you’re considering a similar mod, I’d recommend a small hand drill and taking multiple alignment checks before committing. I’d love to hear how your own build progresses or if you give the mod a try!

  3. Those temperatures in Cyberpunk are seriously impressive for a compact case—my own SFF build runs about 10°C warmer under similar load. Your point about the iCUE Link system simplifying cable management really resonates, as that’s always the biggest headache in these tiny builds. What was the trickiest part of modifying the GPU standoff for that level fit?

    1. Thanks, and I totally agree—the iCUE Link system was a lifesaver for keeping cables tidy in such a tight space. The trickiest part of the GPU standoff mod was actually measuring and drilling the new mounting holes precisely to avoid stressing the PCIe slot; I used a small hand drill and went very slowly with plenty of test fittings. If you’re attempting something similar, I’d recommend checking out the SFF.Network forums for some great guides on custom GPU mounting. I’d love to hear how your own build progresses or if you give the mod a try!

Leave a Reply